Selecting Energy Saving Mode
ENGLISH
If you wish to save Energy when using your air conditioner, | Remote Control | Control Panel |
select the Energy Saving mode with the Energy Saver button. |
1To select the Energy Saving mode, press the Energy Saver button on the remote control or unit one or more times until the Energy Saver indicator lights up.
Result: | The fan and compressor cycle on and off together. |
| The fan will continue to run for a short time after the |
| compressor cycles off. |
2To stop the Energy Saving mode, press the Energy Saver button on the remote control or unit again.
Result: The fan runs at all times, while the compressor cycles on and off.
If you select the Sleep Timer in the Energy Saving mode, the Energy
Saving will be cancelled and the air conditioner will start up in the
Sleep Timer mode.
Temperature and Humidity Ranges
The following table indicates the temperature and humidity ranges within which the air conditioner can be used in the best condition .
Mode | IndoorTemperature | OutdoorTemperature | Indoor Humidity |
|
|
|
|
Cooling | 21 C to 32 C approx. | 21 C to 43 C approx. | 80% or less |
|
|
| |
|
|
| |
If the air conditioner is used at... | Then... |
| |
|
|
| |
Higher temperatures |
| The automatic protection feature may be triggered and the air | |
|
| conditioner stopped. |
|
|
|
| |
Lower temperatures |
| A water leakage or some other malfunction may happen if the | |
|
| heat exchanger freezes. |
|
|
| ||
Higher humidity levels | Water way condense on and drip from the surface of the unit if | ||
|
| it is used for long periods. |
|
|
|
|
|
