Solving Common Problems
ENGLISH
Before contacting the
They may save you the time and expense of an unnecessary service call.
ProblemExplanation/Solution
The air conditioner does not operate at all
Check that the circuit breaker used for the air conditioner has not been triggered.
Check that the power cable is plugged into a wall socket and the socket is switched on, if necessary.
Check that the operating mode indicator (COOL or FAN) on the unit is lit up; if necessary press 
(On/Off) button on the remote control or unit.
The air conditioner does not operate with the remote control
Check that there are no obstacles between you and the unit. Replace the remote control batteries if necessary.
Check that you are close enough to the unit (seven metres/yards or less).
No beep is heard when you press | Check that you are pointing the remote control at the remote |
(On/Off) on the remote control | control sensor on the unit. |
| Replace the remote control batteries if necessary. |
|
|
The air conditioner does not cool | Check that the correct operating mode has been selected COOL.. |
| The room temperature may be too low. |
| Dust may be blocking the air filter; refer to page 16 for |
| cleaning instructions. |
| Check that there is no obstacle blocking the air flow into or out of |
| the unit. |
The air flow direction does not change when you press the 
or 
on the unit button
Check that the air conditioner has been switched on; if necessary, press
(On/Off) button on the remote control or unit.
The timer is not correctly triggered | Check that the timer has been programmed correctly; |
| see page 12~13. |
|
|
Odour is permeated in the | Air the room. |
room during air conditioning |
|
|
|
