Using the camera buttons to set the camera

The recording mode function can be set up by using the camera buttons.

POWER button

Used for turning the camera’s power on / off. If there is no operation during the specified

time, the camera's power will be turned

off automatically to save battery life. Refer to page 48 for more information about the

auto power off function.

SHUTTER button

Used for taking an image or recording voice in the RECORDING mode.

In MOVIE CLIP mode

Pressing the shutter button down fully

starts the process for recording a movie clip. Press the shutter button once and

the movie clip is recorded for as long as the available recording time in the

memory allows. If you wish to stop recording, press the shutter button again.

In STILL IMAGE mode

Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data.

ZOOM W / T button

If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button.

This camera has a 5X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 25X.

TELE Zoom

 

 

Optical zoom TELE

: Pressing the ZOOM T button. This will

 

zoom into the subject i.e. the subject will

 

appear nearer.

 

Digital zoom TELE

: When the maximum (5X) optical zoom

 

is selected, pressing the ZOOM T button

 

activates the digital zoom software.

 

Releasing ZOOM T button stops the

 

digital zooming at the required setting.

 

Once the maximum digital zoom (5X) is

 

achieved, pressing the ZOOM T button

 

will have no effect.

Pressing

 

Pressing

the ZOOM

the ZOOM

T button

 

T button

[WIDE zoom]

[TELE zoom]

[Digital zoom 5.0X]

22

Page 23
Image 23
Samsung BL1050 manual Zoom W / T button, Power button, Shutter button