Samsung BN68-01412D-00 user manual Scanning and Switching between Anynet+ Devices

Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button.

Then press the ENTER button to select "Anynet+(HDMI- CEC)".

2.Press the ▲ or ▼ button to select "Select Device", then press the ENTER button.

3.Press the ▲ or ▼ button to select to a particular device and press the ENTER button. It is switched to the selected device.

4.If you cannot find a device you want, press the ▲ or ▼ button to

select "Setup", then press the ENTER button.

TV	P9
	View TV
	Select Device		
	Record		
	Menu on Device		
	Device Operation		
	Receiver	:Off	
	Setup		
	Move	Enter
	Return

5. Press the ▲ or ▼ button to select "Searching Connections",	Setup
then press the ENTER button.	Anynet+ (HDMI-CEC)	:	On	
The message "Configuring Anynet+ connection..." is displayed.	Auto Turn Off	:	Yes	
When searching devices completes, the connected devices are
	Searching Connections			
listed in the Anynet+ menu.
➣ Switching to the selected devices may take up to 2 minutes.	Move	Enter		Return
You cannot cancel the operation during the switching
operation.

➣The time required to scan for devices is determined by the number of connected devices.

➣When the device scan is complete, the number of found devices is not displayed.

➣Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is on or under a specific circumstance are not displayed in the device list.

Therefore select "Searching Connections" menu to search devices.

➣If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.

English - 57