Setting Up the Mobile Computer

Charging with a Battery Charger

The Pegaso is available with a Four-Slot Battery Charger. Use the Battery Charger to charge batteries independently of the unit.

Figure 4. Four-Slot Battery Charger

LEDs

Backup Battery

The rechargeable 3.7V Lithium Backup Battery receives its charge from the Bat- tery Pack. To retain date, time, data, and other settings for the Pegaso, maintain at least a minimal charge on the Battery Pack.

To maximize the backup battery usable life always store the unit with a main battery installed or place the unit in a charging dock when not in use.

When the backup battery is low, an icon will display on the status bar (see Table 1 on page 8), and a dialog box will open to alert you.

Setting Up the Mobile Computer

At first use or cold reset, the unit will go through an initial bootup sequence:

1.Touchscreen Calibration on page 13.

2.Getting Connected on page 13.

3.IP Network Setup on page 13.

4.Setting the Date and Time on page 15.

12

Pegaso™ Industrial PDA with Windows® CE

Page 14
Image 14
Datalogic Scanning Industrial PDA manual Setting Up the Mobile Computer, Charging with a Battery Charger, Backup Battery