Datalogic Scanning Industrial PDA manual Flashing RED

Troubleshooting

Problem	Possible Cause		Solution
	Time-out fault: the	In either case, if the Spare Battery LED is
	spare battery pack	flashing red, do the following:
	charging has	1.	Disconnect the AC adapter from the dock.
	exceeded the maxi-
		2.	Remove the spare battery pack and the
	mum time-out period.
		Pegaso from the dock.
		3.	Connect the AC adapter to the dock.
The Spare Battery		4.	If the Spare Battery LED is flashing red,
LED on the dock is	Over-voltage fault: the	there is a problem with the dock. Disconnect
flashing RED.	spare battery pack	the AC adapter from the dock and contact a
	charging has	service technician.
		5.	If the Spare Battery LED is off, insert a dif-
	exceeded the maxi-
	mum charge voltage	ferent spare battery pack in the dock.
	of the battery.	6.	Otherwise, there is a problem with the first
		spare battery pack. Discontinue use of the first
		spare battery pack. Refer to the PRG for
		instructions on battery disposal.

30 Pegaso™ Industrial PDA with Windows® CE