Powering the Pegaso
You must charge the battery pack and backup battery in a dock or with a power cable prior to your first use of the Pegaso. The initial charge time is approximately 4 hours.
If you remove the battery pack or it fails, there is a
CAUTION in which to insert a charged battery pack before the backup battery fails. If your backup battery fails, the contents of the RAM memory
will be lost. If your backup battery is less than fully charged, there is a smaller window of time available. Usage time will be reduced, also.
Always charge within temperature range of
Use only the authorized power supplies, battery packs, chargers, and docks supplied by your Datalogic reseller. Use only the battery pack that is specified. Only use the battery with a charging system that has been qualified with the system per this standard. Use of an unquali- fied battery or charger may present a risk of fire, explosion, leakage, or other hazard. Unauthorized battery pack and improper use of either battery pack or charging system may present a risk of fire, explosion, leakage or other hazards. The use of other power supplies can dam- age the unit and void your warranty. Refer to the PRG for the correct power supplies and Accessories.
6 | Pegaso™ Industrial PDA with Windows® CE |
