Configuring Picture Option |
|
|
| |||
1. | Press the MENU button to display the menu. | TV | Picture |
| ||
| Press the ENTER button, to select "Picture". | More |
|
| ||
2. | Picture Options | | ||||
Press the ▲ or ▼ button to select "Picture Options", then press | Reset | : OK | | |||
3. | the ENTER | button. |
|
|
| |
Select the required option by pressing the ▲ or ▼ button, then |
|
|
| |||
| press the ENTER | button. |
|
|
| |
4. | When you are satisfied with your setting, press the ENTER | Move | Enter | Return | ||
| button. |
|
| |||
|
|
|
|
|
| |
5. | Press the EXIT button to exit. | TV | Picture Options |
| ||
➣ In PC mode, you can only make changes to the “Colour | Colour Tone | : Normal | | |
Size | : 16:9 | | ||
Tone” and “Size” from among the items in “Picture Options”. | Digital NR | : Auto | | |
| DNIe | : Off | | |
| HDMI Black Level : Normal | | ||
| Movie Plus | : Low | | |
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2 | Blue Only Mode | : Off | | |
|
|
| ||
You can select the most comfortable colour tone to your eyes. | Move | Enter | Return | |
➣ The adjusted values are stored according to the selected | ||||
|
|
| ||
"Picture" mode. |
|
|
| |
➣ “Warm1” or “Warm2” is only activated when the picture mode is "Movie".
♦ Size: 16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦Wide Zoom: Magnify the size of the picture more than 4:3.
♦Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦4:3: This is the default setting for a video movie or normal broadcasting.
♦Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/ 1080p) or Component (1080i/1080p) signals are input.
➣In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣Temporary image retention may occur when viewing a static image on the set for more than two hours.
➣"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the 
by pressing the ► or ENTER
button.
➣"Zoom": Select 
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting 
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
➣When Double ( 
, 
) mode has been set in PIP, the Picture Size cannot be set.
➣After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select 
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
You can select these options by simply pressing the P.SIZE button on the remote control.
English - 18
