♦TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣The
➣When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound menu.
♦Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
−Main: Used to listen to the sound of the main picture.
−Sub: Used to listen to the sound of the sub picture.
Selecting the Sound Mode
You can set the sound mode in the "Tools" menu.
When you set to "Dual
1.Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Dual
3.Press the ◄ or ► button to select required option.
4.Press the ENTER
button.
| Tools |
|
Anynet+ |
| |
Picture Mode | : Standard | |
Sound Mode | : | Custom |
Sleep Timer | : | Off |
SRS TS XT | : | Off |
Energy Saving | : | Off |
Dual | ◄ | Mono ► |
Move | Adjust | Exit |
| Audio Type | Dual 1/2 | Default | |
A2 | Mono | MONO | Automatic | |
Stereo | STEREO ↔ MONO | change | ||
Stereo | ||||
Dual | DUAL 1 ↔ DUAL 2 | DUAL 1 | ||
| ||||
| Mono | MONO | Automatic | |
NICAM | Stereo | MONO ↔ STEREO | change | |
Stereo | Dual | MONO ↔ DUAL 1 | DUAL 1 | |
| DUAL 2 | |||
|
|
|
➣
➣
➣
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal. This function is only available in TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to | TV Side Panel |
watch a TV programme without disturbing the other people in the | |
room. |
|
➣ When you insert the head set jack into the corresponding port, you can operate only "Auto Volume" and "Sound Select"(in PIP mode) in Sound menu.
➣Prolonged use of headphones at a high volume may damage your hearing.
➣You will not receive sound from the speakers when you connect headphones to the system.
➣The headphone volume and TV volume are adjusted differently.
English - 22
