Check Points before Requesting Service
Symptom | Solution |
Anynet+ does not | ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ |
work. | devices only. |
| ■ Connect only one receiver. |
| ■ Check if the Anynet+ device power cord is properly connected. |
| ■ Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections. |
| ■ Check whether Anynet+ |
| ■ Check whether the TV remote control is in TV mode. |
| ■ Check whether it is Anynet+ exclusive remote control. |
| ■ Anynet+ doesn’t work at a certain condition. (Searching channels, Operating |
| WISELINK, Plug & Play, etc.) |
| ■ When connecting or removing the HDMI 1.3 cable, please make sure to search |
| devices again or restart your TV. |
| ■ Check if the Anynet+ Function of Anynet+ device is set on. |
I want to start | ■ Check if the Anynet+ device is properly connected to the TV and check if the |
Anynet+. | Anynet+ |
| ■ Press the TV button on the TV remote control to switch to TV. Then press the |
| TOOLS button to show the Anynet+ menu and select a menu you want. |
I want to exit Anynet+. ■ Select View TV in Anynet+ menu.
■Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
■Press any of P
/
, CH LIST,
TV mode. (Note that the channel button operates only when a
The Configuring | ■ You cannot use the remote control when you are configuring Anynet+ or | |
Anynet+ connection | switching to a view mode. | |
message appears on | ■ Use the remote control when the Anynet+ setting or switching to view mode is | |
the screen. | complete. | |
The Anynet+ device | You cannot use the play function when Plug & Play is in progress. | |
does not play. | ||
| ||
The connected device | ■ Check whether or not the device supports Anynet+ functions. | |
is not displayed. | ■ Check whether or not the HDMI 1.3 cable is properly connected. | |
| ■ Check whether Anynet+ | |
| ■ Search Anynet+ devices again. | |
| ■ You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI | |
| cables may not support Anynet+ functions. | |
| ■ If it is terminated by an abnormal situation such as disconnecting the HDMI 1.3 | |
| cable or power cord or a power failure, please repeat the device scan. | |
The TV programme | Check whether the antenna jack on the recording device is properly connected. | |
cannot be recorded. | ||
|
English - 42
