Viewing Picture-in-Picture, PIP → On / Off

HDMI Black Level → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.

N This function is active only when the external input connects to HDMI (RGB signals).

100Hz Motion Plus → Off / Low / Medium / High / Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

N This function is not available in PC mode.

N If you enable “100 Hz Motion Plus”, noise may appear on the screen. If this occurs, set “100Hz Motion Plus” to “off” or select one of the other options.

Blue Only Mode → Off / On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar

Patterns, without using an additional Blue Filter.

N “Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

❑Picture Reset → Reset Picture Mode / Cancel

Resets all picture settings to the default values.

NSelect a picture mode to be reset. The reset is performed for each picture mode.

	Viewing Picture-in-Picture
	You can display a sub picture within the main picture of set programme or video
	input. In this way, you can watch the picture of set programme or video input from	Setup
	any connected equipment while watching the main picture.
	N You may notice that the picture in the PIP window becomes slightly unnatural

	when you use the main screen to view a game or karaoke.