Selecting the Sound Mode
You can set the sound mode in the “Tools” menu. When you set to “Dual I II”, the current sound mode is displayed on the screen.
1.Press the TOOLS button on the remote control.
2.Press the ▲ or ▼ button to select “Dual I II”.
3.Press the ◄ or ► button to select required option.
4.Press the ENTER 
button.
| Audio Type |
|
|
| Dual 1/2 | Default | |||
| Mono |
|
|
| MONO | Automatic change | |||
A2 Stereo | Stereo |
|
| STEREO ↔ MONO | |||||
|
|
| |||||||
| Dual |
|
| DUAL 1 ↔ DUAL 2 | DUAL 1 | ||||
| Mono |
|
|
| MONO | Automatic change | |||
NICAM | Stereo |
|
| MONO ↔ STEREO | |||||
|
|
| |||||||
Stereo | Dual |
|
| MONO ↔ DUAL 1 |
|
| DUAL 1 | ||
|
|
|
| ||||||
|
|
|
| DUAL 2 |
|
|
| ||
|
|
|
|
|
|
|
|
| |
Tools
Anynet+ |
| ||
Picture Size | : | Auto Wide |
|
Picture Mode | : | Standard |
|
Sound Mode | : | Custom |
|
Sleep Timer | : | Off |
|
SRS TS XT | : | Off |
|
Energy Saving | : | Off |
|
Dual l ll | ◄ | Mono | ► |
Move |
| Adjust e Exit | |
➣If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
➣This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
➣This function is only available in Analogue TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without disturbing other people in the room.
➣When you insert the headphone’s plug into the headphone jack, you can not operate “Mode”, “Equalizer”, “SRS TruSurround XT” and “Select Speaker” in Sound menu.
➣Prolonged use of headphones at a high volume may damage your hearing.
➣You will not hear sound from the speakers when you connect headphones to the TV.
➣The headphone volume and TV volume are adjusted separately.
TV Side Panel
15
English - 35
