9
01 Getting Started
English
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
Connecting the power cord and antenn a.
The PDP device may interfere with an a mateur radio or AM radio.
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWER
P
button. Plug & Play is available only when the Input source is set to TV.
To return to the previous step, press the Red button.
1Selecting a language Press the or button, then press the ENTER
E
button.
Select the desired OSD (On Screen Display) language.
P
POWER

INFO GUIDE

2Selecting Store Demo
or Home Use
Press the or button, then press the ENTER
E
button.
ySelect the Home Use mode. Store Demo mode is for retail
environments.
yTo return the unit’s settings from Store Demo to Home Use
(standard): Press the volume button on the TV. When you
see the volume OSD, press and hold MENU for 5 sec.
3Selecting an antenna Press the or button, then press the ENTER
E
button. Select Air, Cable or Auto.
4Selecting a channel Press the or button, then press the ENTER
E
button. Select the channel source
to memorize. When setting the antenna source to Cable, a step appears allowing you to
assign numerical values (channel frequencies) to the channels. For more information, refer to
Channel Auto Program (p. 15).
Press the ENTER
E
button at any time to interrupt the memoriz ation process.
5Setting the Clock
Mode
Set the Clock Mode automatically or manually.
yAuto: Allows you to select DST (Daylight Saving Time) mode and time zone
yManual: Allows you to manually set the current date and time (p. 22).
6Viewing the HD
Connection Guide.
The connection method for the best HD screen quality is displayed.
7Enjoy your TV. Press the ENTER
E
button.
If You Want to Reset This Feature...
MENU
m
Setup Plug & Play ENTER
E
ANT OUT
VHF/UHF Antenna
Antenna Cable (Not Supplied)
or
Cable
Power Input
[PC550-ZC]BN68-02580B-05L02.indb 9 2010-08-25 오전 11:03:30