7Change the code set by tapping or and then select <Send IR>.
If the external device turns on or off, select <Apply> to register the external device.
8If you can’t find codeset on the list, tap <Learn> to start the remote’s external device registration process.
•Tap <Help> for learning guide or tap <OK> to start learning.
9You must now assign the control buttons on the device’s remote to corresponding buttons on the LCD remote. To begin, tap a button on the LCD remote’s screen to which you want to assign a button from the device’s remote.
•The selected button blinks.
10Press the corresponding button on the device’s remote.
•When the button LCD remote’s stops blinking, the assignment is complete. Assign the other buttons in the same way.
•To register the Channel, Volume and Mute buttons on an external device, tap <VOL/CH> at the top of the Touch Control.
11Select <OK> to complete the registration.
Touch Control
Codeset
Send IR to device
POWER
Send IR | Detail |
Apply
Select a button, and enter the device remote control button you wish to learn within 10 seconds. Press OK to finish learning.
Help OK
Navigation
VOL/CH
LearnOK
Navigation
18