JVC AV-27GFH manual Diagram #1

Connections

Important Note About Diagrams:

The connection diagrams are intended to show some basic general connections. Some cable companies may require special connections to properly use your television. If you follow these diagrams and the television does not work properly, contact your local cable operator for more connection information.

Diagram #1

WALL

CABLE or ANTENNA

OUT

	AUDIO	VIDEO	S-VIDEO	TWO-WAY
R	L MONO		REAR
			IN	SPLITTER
		OVER
				VCR
				IN
	DIGITAL
	INTERFACE
				OR
		OR

1)Connect the antenna or cable TV wire from the wall outlet, in to the RF Input of the two-way splitter.

2)Connect an RF cable from the one of the RF Outputs on the splitter, in to the RF Input on the back of the VCR.

3)Connect an RF cable from the other the RF Output on the splitter, in to the RF Input on the back of the TV.

4)Connect the yellow video cable out from the VCR’s Video Output, in to the TV’s Video Input jack, OR connect an S-Video cable from the VCR’s S-Video output, to the TV’s S-Video input.

5)Connect the white audio cable out from the VCR’s Left Audio Output, in to the TV’s Left Audio Input Jack.

6)Connect the red audio cable out from the VCR’s Right Audio Output, in to the TV’s Right Audio Input jack.

•If your VCR is a mono sound unit, it will have only one Audio Out jack. Connect it to the TV’s Left Audio Input.

•Please consult your VCR’s owner’s manual for more information on its operation.

12