JVC AV-27GFH manual Set Lock Code, V-Chip, 0 0 0, Finish, The lock icon appears

V-Chip

Set Lock Code

The V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below.

Press the MENU button

 To SET LOCK CODE

 To operate

The lock icon appears

Press ZERO to access the Lock Code

LOCK CODE 0 0 0 0

FINISH

The first digit will be highlighted

 To select the number

 To move to the next digit

Continue to follow these directions for all four numbers

 To FINISH

 To save settings and exit

Your Lock Code is now set.

NOTES:

•After a power interruption you must reset the Lock Code.

•Write your Lock Code number down and keep it hidden from potential viewers.

•If you forget the Lock Code, a new code may be set using the steps listed above.

25