E. Junction Box Installation

If the box is being wired from the OUTSIDE of the appliance:

Remove the cover plate located on the outer shell - right side (see Figure 10.5).

Install the supplied Romex™ connector in the cover plate.

Feed the necessary length of wire through the con- nector.

Make all necessary wire connections and reat- tach the cover plate to the outer shell.

If the box is being wired from the INSIDE of the appliance:

Remove the screw attaching the junction box/ receptacle to the outer shell, rotate the junction box inward to disengage it from the outer shell (see Figure 10.5).

Pull the electrical wires from outside the appli- ance through this opening into the valve com- partment.

Feed the necessary length of wire through the connector.

Make all necessary wire connections to the junction box/receptacle and reassemble the junction box/receptacle to the outer shell.

 

 

Romex

 

 

Connector

 

 

14/2WG

 

 

Cover Plate

 

 

outside firebox

WHT

 

 

BLK

 

 

WHT

 

 

BLK

 

Copper

 

 

GRN wire

 

ground attached

 

to GRN screw with

inside box

GRN wire

 

NOTE: Do NOT wire

Figure 10.5 Junction Box Detail

110VAC to wall switch.

F. Wall Switch Installation for Fan (Optional)

If the box is being wired to a wall

 

 

 

mounted switch for use with a fan (See

 

 

 

Figure 10.6):

 

 

SWITCH

The power supply for the appliance

 

 

MINIMUM 14-3 AWG

 

 

 

must be brought into a switch box.

WITH GROUND

 

 

 

 

 

 

• The power can then be supplied from

 

Red

 

 

Black

Black

 

the switch box to the appliance using

 

White

White

 

 

Green

Green

 

a minimum of 14-3 with ground wire.

JUNCTION BOX

Black White Green

 

• At the switch box connect the black

Red

 

 

(hot) wire and red (switch leg) wire to

 

 

POWER

 

the wall switch as shown.

 

 

SUPPLY WIRES

 

 

SWITCH BOX

 

• At the appliance connect the black (hot),

 

 

 

 

 

 

white (neutral) and green (ground)

 

 

 

 

wires to the junction box as shown.

 

 

 

Add a 1/4 inch insulated female con-

Red

 

 

 

nector to the red (switch leg) wire, route

 

 

 

 

it through the knockout in the face of

 

 

 

 

the junction box, and connect to the top

Figure 10.6 Junction Box Wired to Wall Switch

 

 

fan switch connector (1/4 inch male) as

 

 

 

 

shown.

 

 

 

 

Heat & Glo • SL-750TRS-IPI-E, SL-550TRS-IPI-E, SL-350TRS-D, SL-350TRS-IPI2120-900 Rev. D • 6/07

43

Page 43
Image 43
Hearth and Home Technologies SL-350TRS-IPI Junction Box Installation, Wall Switch Installation for Fan Optional

SL-550TRS-IPI-E, SL-350TRS-IPI, SL-750TRS-IPI-E, SL-350TRS-D specifications

Hearth and Home Technologies has made a significant impact in the hearth and home industry with its innovative line of gas fireplaces, specifically the SL-350TRS-D, SL-750TRS-IPI-E, SL-350TRS-IPI, and SL-550TRS-IPI-E models. Each of these units offers a unique combination of design and functionality, catering to diverse consumer needs.

The SL-350TRS-D is designed to create an inviting ambiance with its linear design and clean lines. It features a powerful remote control system, allowing users to adjust the flame height and heat output effortlessly. The advanced burner technology provides a realistic flame presentation that enhances the overall aesthetic of any space. Additionally, the direct vent system ensures optimal efficiency, channeling combustion gases outside while drawing in fresh air for combustion.

Moving on to the SL-750TRS-IPI-E, this model expands on the features of its predecessor, delivering higher heat output and an even larger viewing area. It includes an Integrated Piezo Ignition (IPI) system that ignites the fireplace at the push of a button, enhancing user convenience. The SL-750TRS-IPI-E also comes with adjustable flames and a selection of decorative media, allowing customers to customize the look to fit their home decor.

The SL-350TRS-IPI offers similar functionalities as the other models but incorporates additional energy-saving technologies. Its modulating gas valve allows for precise temperature control, reducing fuel consumption while maintaining comfortable warmth. Furthermore, this model is equipped with an intuitive smartphone application, providing users with remote access to control the fireplace from anywhere in the home.

Lastly, the SL-550TRS-IPI-E bridges the gap between the other units in terms of size and heat production. Like the SL-750, it features the IPI system for easy ignition and impressive design aesthetics. Its larger viewing area showcases a captivating flame display that serves as a focal point in any room. The fireplace also boasts heat management solutions, allowing for optimal warmth distribution without compromising on energy efficiency.

Overall, Hearth and Home Technologies' SL series offers advanced features and innovative technologies that cater to today’s energy-conscious consumers while creating an appealing environment. With their stylish designs, customizable options, and user-friendly functionalities, these models are set to elevate any home's ambiance. Whether you are looking for efficient heating or a modern design element, these gas fireplaces bring warmth, convenience, and style to the forefront.