Heat & Glo • SL-750TRS-IPI-E, SL-550TRS-IPI-E, SL-350TRS-D, SL-350TRS-IPI • 2120-900 Rev. D • 6/0754
STEP 4.
LOG #3 (SRV2065-702) Place log #3 on right side of
grate. The notch on the log should fi t over the bar on the
far right side of the grate. Push the right side of log #3
against the grate tab and push the left side back until it
comes into contact with the burner detail.
STEP 5.
LOG #4 (SRV2065-705) Place log #4 so that the notch
is touching the fi rst grate tine and is laying in the fl at spot
of log #2. The right end of log #4 should touch the back
refractory panel. See Figure 2.
STEP 6.
LOG #5 (SRV2065-701) Place log #5 on log #2. The
front left of the log will rest on log #4. Log 5 must be
pushed back against refractory. See Figure 3.
3
3
1
1
2
2
4
4
3
3
2
2
5
5
1
1
1
1
2
2
3
3
4
4
Figure 1.
Figure 2.
Figure 3.
LOG TOUCHES REFRACTORY PANEL
NOTCH
LOG #5/REFRACTORY PANEL CONTACT POINTS