Replacing an Ink Tank, When Low Ink is Detected | Canon 900D

Replacing an Ink Tank

Replacing an Ink Tank

When replacing an ink tank, check the model number very carefully.

The printer will not print properly if the wrong ink tank is used, or installed in the incorrect position.

With this printer, ink tanks must be installed from the right in the order indicated below.

• Magenta		: BCI-6M	• Black		: BCI-6BK
•	Photo Magenta : BCI-6PM Photo		•	Cyan	: BCI-6C
•	Yellow	: BCI-6Y	•	Photo Cyan : BCI-6PC Photo

Knowing When to Replace an Ink Tank

If an ink tank needs replacing the Power lamp will change from green to orange and flash four times as soon as printing begins. It is important to identify the empty tank using the LCD and replace it.

Note Should missing characters or white streaks appear despite sufficient ink levels. See “When Printing Becomes Faint or Colors are Incorrect” on page 38.

The following message appears on the LCD when ink is empty.

Printing will resume as soon as ink tank is replaced and the front cover is closed.

The ink tank with symbol is out of ink. Replace with a new ink tank.

			• Press the Cancel button to cancel the current print job.
			• Press the Cancel button to cancel the current print job.
			• Press the Resume button to resume printing with an empty ink
			tank.
			When printing is finished, replace the ink tank immediately. If you
	Empty ink tank
	Empty ink tank		continue printing with an empty ink tank, it may cause a problem.

Notes		When Low Ink is Detected
		When printing starts, the message is displayed on the LCD.
		[!] indicates ink low. Obtain a replacement tank as soon as
		possible.

zTo continue printing, select Yes and then press the OK button.

zTo cancel printing, select NO and then press the OK button.

35

Image 36

Canon 900D manual Replacing an Ink Tank, Knowing When to Replace an Ink Tank, When Low Ink is Detected

Contents

Series Photo Printer Direct Printing Guide Contents ContentsPrinting Flow Using a Memory Card Printing Maintenance 2 Power Lamp 5 Settings ButtonOperation Panel and Menu Display Operation Panel Names and Functions 12 Cancel Button 14 Indicator Lamp9 Buttons 10 Photo Viewer Button Head cleaning Deep cleaningMenu Displays Print all Printing Flow Step 1 Turn on the Printer Step 2 Load the paperStep 3 Insert the memory card Step 5 Change/Confirm Print Settings and Start Printing Change the SettingsStep 4 Selecting the Print Mode Using a Memory Card Memory Cards Supported by this printerInserting a Memory Card 3 Install the memory card in the card slot 1 Turn on the printer 2 Open the card slot cover Removing a Memory Card 4 Confirm the settings Printing PhotographPrinting an Image Displayed on the LCD Turn on the printer and Load the Paper 5 Change the settings 6 Start printing Loading Paper „ Print Media to Avoid„ Loading the Print Media 1 Turn on the printer 3 Preparing to Load Paper 4 Loading the PaperLoad Limit Mark „ Media Types for Card Direct Printing Media TypePaper Rest Load Paper Size Printing Images from a Memory Card Specifying how many copies to print for each image„ Specifying the number of copies to print for each image 1 Prepare to print „ Printing a specified area - Trimming 3 Specify the number of copies to print4 Start printing 1 Set the Trimming Mode 2 Trimming and Rotating the Sections you wish to Print3 Finalize the trimmed area Printing all images 3 Start printing Printing an Image List - Print Index Specifying the layout z Borderedz Borderless z Postcard 3 Specify the layout 4 Select the image to print5 Start printing 2 Using the buttons to specify the number of copies to print Printing According to the Settings Made on the Camera - DPOF Printing 1 Turn on the printer and load the paper2 Set the DPOF mode „ Settings Menu Display Specifying the Paper and Optimizing Images „ How to Make Settings „ Other Setting Items2 Finalize the Settings 1 Select an item to set „ Borderless Printing Borderless„ Date „ Print Quality Digital Camera Setting Printing Photographs Directly from a Digital CameraMedia Types for Digital Camera 4 Start printing using the print function of the digital camera Printing from a Digital CameraEnsure that the printer is turned on Load the paper 3 Connect the digital camera and the printer Print quality setting Maintenance 1 Display the image you want to print in the Replay mode2 Press the SET button to display the Print menu z You can make the following prints directly from a digital camera Using Photo Viewer 3 Choose print settings and start printingOther Useful Functions Ensure that the printer and the computer are turned on 4 Exit the Photo Viewer Notes Changing the Display ModeThe Photo Viewer is terminated in the following case Setting up the Card Slot as the Memory Card Drive of the Computer Open the USB memory card setup windowThe USB Memory Card Settings window appears The Read/write attribute setting window appears Turn on the printer Select Maintenance from the Menu Changing the Language DisplayedStart the BJ Utility Adjusting Contrast of the LCD 3 Select a language for display3 Select Contrast Reducing the Sound of Printer Operation 3 Select Quiet mode Knowing When to Replace an Ink Tank When Low Ink is DetectedReplacing an Ink Tank 3 Prepare a replacement tank Replacing Ink Tanks1 Ensure that the printer is on, and then open the front cover 2 Remove the empty ink tank 4 Install the ink tank 5 Close the front cover Printing Maintenance When Printing Becomes Faint or Colors are IncorrectStep1 Step2 Printing the Nozzle Check Pattern Examining the Nozzle Check PatternPrinting the nozzle check pattern Print Head Cleaning Ensure that the printer is on Print Head CleaningAfter print head cleaning finishes Print Head Deep Cleaning Ensure that the printer is on Print Head Deep Cleaning Note When Automatic Print Head Aligning Cannot Execute Correctly Aligning Print Head - Auto head alignAlign the print head automatically Troubleshooting A Message is Displayed on the LCDMessage Try This Note Adjusting the Print Head Manually If the Same Error Persists „ Printed Surface is Scratched Possible CauseNote If the printed surface is still scratched „ Cannot Print Properly from the Digital Camera An Error Message is Displayed While Using the Photo Viewer Error Message Index Read/write mode Read-only modeSmartMedia Card 7, 8