JVC AV-27GFH manual Remote Control, RM-C205

Remote Control

RM-C205

VIDEO	SLEEP	POWER
STATUS	TIMER
DISPLAY		INPUT

1	2	3
4	5	6
7	8	9
100+	0	RETURN+
MUTING		V CHIP
	+
	CH
VOL		VOL
		+

CH

MENUEXIT

VCR CONTROL

CHANNEL POWER TV/VCR

REW PLAY FF

REC STOP PAUSE

RM-C205

(optional)

Remote Control Basics

•Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” at the bottom of this page for instructions.

•Press the POWER button to turn the television on or off.

•Press the CH+ and CH- buttons to scan through the channels. Tap the CH+ or CH- button to move through the channels one channel at a time.

•To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or CH-. The channels will zip by at a rate of five channels per second.

•Press VOL+ or VOL - to raise or lower the volume. An indicator bar will appear onscreen to show you the television volume level.

•The CH+/- and VOL+/- buttons are also used to navigate JVC’s onscreen menu system.

•You can directly access specific channels using the 10-key pad.

•For more information on remote control button features, see pages 26 to 28.

Note: You can operate the basic functions of any JVC Brand

VCR unit. Operational features include: Power On and Off, Play, Stop, Pause, Rewind, Fast Forward, Channel up and down and Record.

Changing the Batteries

Raise the latch on the remote’s back cover to remove it.

Insert two AA batteries (supplied), carefully noting the "+" and "-" markings on the batteries and on the remote control. To avoid a potential short circuit, insert the "-" end first. Be sure to use only size AA batteries.

When batteries are installed, snap the cover back into place (until it clicks into position).

•If the remote control acts erratically, replace the batteries. Typical battery life is six months to one year. We recommend using alkaline batteries for longer battery life.

15