Quick Setup 1
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you need to begin using your new television right away. This information includes basic instructions on operating your optional JVC remote control, making a simple cable/antenna and optional VCR connection.
If you have questions, or for more detailed information on any of these steps, please consult other sections of this guide.
Step One - The Remote Control (Optional)
The remote control is the key to operating your television's many great features. Before you can operate your remote control, you first need to install the batteries.
Raise the latch on the remote control’s back cover to remove. Insert two batteries carefully noting the “+” and
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner of the remote.
POWER | MUTING | V CHIP |
|
| + |
|
| CH |
| VOL | VOL |
Remote Power |
| + |
|
| |
Button |
| CH |
| MENU | EXIT |
Remote Key Feature Buttons
The four key feature buttons at the center of the remote can be used for basic operation of the television. The top and bottom buttons will scan forward and back through the available channels. The right and left buttons will turn the volume up or down. These buttons are also marked with four arrows and are also used with JVC's onscreen menu system. You will need to use these buttons later in the Quick Setup Section.
The next step is to connect your television to an antenna or cable.
Proceed to Step Two
9
