Samsung CE1160/XEU Installing Your Microwave Oven Setting the Time, To display the time, Button

Models: CE1160/XEU

1 36
Download 36 pages 34.91 Kb
Page 6
Image 6

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

Installing Your Microwave Oven

 

Setting the Time

This microwave oven can be placed almost anywhere (kitchen work GB surface or shelf, movable trolley, table).

Your microwave oven has an inbuilt clock. The time can be displayed in either the 12-hour or 24-hour notation. You must set the clock:

20cm

10cm

above

behind

85 cm

10cm on

of the floor

the side

1.When you install your oven, make sure there is adequate ventilation for your oven by leaving at least 10 cm

(4 inches) of space behind, and on the sides of the oven and 20 cm (8 inches) of space above the oven and 85 cm (33 inches) of the floor.

2.Remove all packing materials inside the oven. Install the roller ring and turntable.

Check that the turntable rotates freely.

When you first install your microwave oven

After a power failure

Do not forget to reset the clock when you switch to and from summer or winter time.

1. To display the time in

Then press the Clock

the...

button...

12-hour notation

Once

24-hour notation

Twice

3.This microwave oven has to be positioned so that plug is accessible.

Never block the air vents as the oven may overheat and automatically switch itself off. It will remain inoperable until it has cooled sufficiently.

For your personal safety, plug the cable into a 3-pin, 230V, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

Do not install the microwave oven in hot or damp surroundings like next to a traditional oven or radiator. The power supply specifications of the oven must be respected and any extension cable used must be of the same standard as the power cable supplied with the oven. Wipe the interior and the door seal with a damp cloth before using your microwave oven for the first time.

Selecting the Display Language

The first time you plug the power cord into an outlet, or after there has been an interruption in power, the display shows “HELLO SET LANGUAGE USING () / ( ) KEY”. At this point, you can select a language for the display. You can choose from English, French, Dutch, German, Spanish, Italian and Russian.

1.Press the () and ( ) button immediately after plugging in your microwave, or immediately after a power shortage.

Result: If you continue to press the () and ( ) button, the settings will cycle in the following order:

ENGLISH, FRENCH, DUTCH, GERMAN, SPANISH, ITALIAN, RUSSIAN.

2.When you have selected the language and display you want to use, press the Start button to end this procedure.

2.Press () and ( ) button.

3.Press the Clock button.

4.Press () and ( ) button.

5.Press the Clock button.

Result: The time is displayed whenever you are not using the microwave oven.

Checking that Your Oven is Operating Correctly

The following simple procedure enables you to check that your oven is working correctly at all times. If you are in doubt, refer to the section entitled “What to Do if You are in Doubt or Have a Problem” next the page.

The oven must be plugged into an appropriate wall socket. The turntable must be in position in the oven. If a power level other than the maximum (100% - 900 W) is used, the water takes longer to boil.

Open the oven door by pulling the handle on the right side of the door. Place a glass of water on the turntable. Close the door.

Press the start button and set the time to 4 or 5 minutes, by pressing the start button the appropriate number of times. Result: The oven heats the water for 4 or 5 minutes.

The water should then be boiling.

6

Page 6
Image 6
Samsung CE1160/XEU Installing Your Microwave Oven Setting the Time, Selecting the Display Language, To display the time