Choosing the Heating Element Position |
| Choosing the Accessories |
GB | The heating element is used when grilling. It can be placed in one of |
| two positions: |
•Horizontal position for grilling or combined microwave + grill cooking
☛Only change the position of the heating element when it is cold and do not apply excessive force when placing it in the vertical position.
To set the heating element | Then... |
to the... |
|
|
|
Horizontal position (grill or | ◆ Pull the heating element |
combined microwave + | towards you |
grill) | ◆ Push it upwards until it is |
| parallel with the roof of the |
| oven |
|
|
When cleaning the upper part inside the cavity, it will be convenient to turn the heater downward by 45° and clean it.
Use
If you wish to select the combined cooking mode (grill and microwave), use only dishes that are
✉For further details on suitable cookware and utensils, refer to the Cookware Guide on page 19.
Manual Stop Turntable Function
The Turntable on/off(
) button stops the turntable from rotating, allowing you to use large dishes that fill the whole oven.
.
☛The results will be less satisfactory in this case as the cooking is less even. We recommend that you turn the dish by hand halfway through the cooking process.
☛Warning! Never operate the oven without local when turntable button is off.
Result The oven may catch fire and become extremely damaged.
1. Push the Turntable on/off( |
| ) button. | |
| |||
Result: | If the turntable button can be pressed, it will | ||
| rotate. If the turntable button pops, it will not | ||
| rotate. |
|
|
✉Don’t press Turntable on/off(
) button during cooking process.
16
