Samsung CL-34M30HS, CL-29M30HS, CL-29Z30HS, CL-32M30HS specs

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the “ANT IN” terminal on the rear panel.

œThis terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

œThis terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

	3
	Connect a coaxial cable
	between an OUTPUT	Incoming Cable
	terminal on the splitter	Incoming Cable
	terminal on the splitter

and the IN terminal on the	Splitter
cable box.	Cable Box

continued...

English - 13

Image 13

Samsung CL-34M30HS, CL-29M30HS, CL-29Z30HS, CL-32M30HS manual Connecting to a Cable Box that Descrambles All Channels

Contents

Owner’s Instructions English Your New TV InstallationOperation Troubleshooting Special FeaturesAppendix Accessories List of Features Familiarizing Yourself with The TV Audio Input Connection Jacks Side´ Video Input Video Input Audio Input jacks Connection Jacks Rear´ Video Input jack Audio-Video Output jacks Mode Remote Control¨ Number buttons +100 VCR/DVD Controls ˛ TV/COMPONENT Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasPlug the adaptor into the ANT in terminal on the rear panel Antennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All Channels Cable Box Switch TV Rear Panel Connecting a VCR Connecting a Second VCR to Record from the TV Connecting to Y, PB, PR Connecting a DVD Player Connecting a Digital TV Set-Top Box TV Side Panel Connecting a Camcorder Connecting to an Analog Amplifier Installing Batteries in the Remote Control Press the Power button on the remote control Plug & Play FeatureTurning the TV On and Off Message Plug & Play is displayed Exit Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-source Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Using the Number Buttons Using the Channel ButtonsUsing the PRE-CH Button to Select the Previous Channel Changing Channels √ button Labeling the Channels Clock 10 30 am Setting the Clock Picture Control Using Automatic Picture Settings Customizing the Picture Press the or button to select Color tone Resetting the Picture Settings to the Factory Defaults Using the Mute Button Adjusting the VolumeSound Control Press the œ or √ button to Using Automatic Sound SettingsSelect a particular item Customizing the Sound Setting the Signal Source Viewing an External Signal Source Set other signal sources AV1, AV2, AV3, S-Video Assigning Names to External Input Mode Press the œ or √ button to adjust the fine tuning Fine Tuning ChannelsPress the or button to select Fine tune Changing the Screen Size depending on the model Digital Noise Reduction Tilt Again to set the timer Using the R.Surf FeatureFreezing the Picture Press the R.SURF button Choosing a Multi-Channel Sound MTS track Press the or button to select Auto volume Auto Volume Setting the Surround Setting the Turbo Sound Press the … or † button to select On Timer Setting the On/Off Timer Setting the Sleep Timer Press the œ or √ button to adjust volume level Setting the Preferred Volume Level and Channel Viewing Closed Captions On-Screen Text Messages Press the or button to select Mode Press the œ or √ button to select the channel to be locked Locking the Channel Setting the On/Off Melody Customizing Your Remote Control Remote Control Codes VCR Codes Cable Box Codes DVD Codes Problem Possible Solution Identifying Problems Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications This page is intentionally Left blank Country Customer Care Center Web Site Contact Samsung WORLD-WIDE