18
Introduction and Installation
To attach the power cable
LWhile pressing on the button with a pointed object such as a screwdriver, insert the power
cable into the terminal connector.
LTo disconnect the power cable, press on the button while pulling out.
LTo attach an optional power cable, cut off about 12 mm (1/2") of the cable cover (1), then
push in firmly until the end of the cable is securely inserted into the power connection
terminal (2).
To attach the wires
LStrip off of the wire cover so that about 9 mm (3/8") of the wire is exposed.
LWhile pressing on the button with a pointed object such as a screwdriver, insert the wire into
the terminal connector.
LTo disconnect a wire, press on the button while pulling out.
Monitor station DC terminal
12 Power cable cross section
Button
Terminal connector
ButtonTerminal connector
12 mm
(1/2")
Correct Incorrect
Button Terminal connector
GM201A.book Page 18 Monday, April 4, 2005 5:10 PM