10
Introduction and Installation
Before installation
To avoid a malfunction or communication disturbance, do not install the monitor station in the
following locations:
– Places where vibration or any other kind of impact occurs.
– Places where echoing is frequent.
– Places where a high concentration of dust, hydrogen sulfide, phosphorus, ammonia, su lfur,
carbon, acid, or noxious fumes occur.
– Within 2 m (6'7") of a TV, microwave, personal computer, air conditioner or any other
electrical device.
Standard installation position of the monitor station
Place the monitor station in a location so that your eyes are the same height as the center of
the display.
Note:
LIn areas surrounded by high electrical field, disturbance may occur in the monitor station’s
image or sound.
LBe sure to install the monitor station more than 5 m (16'5") away from the door station.
LDo not place any objects within 20 cm (8 inches) of the monitor station. This may cause
communication errors or malfunction.
LDo not install the monitor station inside a wall.
GM201A.book Page 10 Monday, April 4, 2005 5:10 PM