Panasonic VL-GM201A 4, 5

Introduction and Installation

4Mount the monitor station to the mounting bracket.

Push the monitor station down until it is secure.

5Take out the AC adaptor and the DC terminal from the case.

LPush the arrow mark on the front case, then release from the rear case.

LTake out the cardboard and wood screws. The wood screws are necessary when

attaching the AC adaptor and the DC terminal to a wall (page 16).

AC adaptor

DC terminal

Arrow mark

GM201A.book Page 14 Monday, April 4, 2005 5:10 PM

Contents

Main Page Important safety instructions CAUTION SAVE THESE INSTRUCTIONS Additional safety information For best performance Included items Optional item information Available optional items Compatible PBXs Location of controls Page Before installation Page Installing the monitor station 1 2 3 4 5 6 7 1 2 Page Button Terminal connector Using the desktop stand (Optional) Turn ing {PBX MODE} switch ON/OFF 1 2 Switch cover {PBX MODE} switch Page Connecting to a PBX {PBX MODE} switch Answering a door call using the monitor station Page Page Monitoring the outside {TALK} 1 2 {MONITOR} {BRIGHT} Opening a door (door opener) {DOOR} 1 Help Troubleshooting Help Cleaning General Information Technical data about this product Monitor station AC adaptor (Part number: PFAP1014) General Information FCC and Other Information CAUTION: NOTE: PFQX2164ZA