Samsung CL21K30MQ, CL21K30M16 instruction

I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

	3
	Connect a coaxial cable
	between an OUTPUT ter-	Incoming Cable
	minal on the splitter and	Incoming Cable
	minal on the splitter and

the IN terminal on the	Splitter
cable box.	Cable Box
	Continued...

11

Image 11

Samsung CL21K30MQ, CL21K30M16 manual Connecting to a Cable Box that Descrambles All Channels

Contents

Owner’s Instructions Operation InstallationYour New TV Appendix Special FeaturesTroubleshooting Chapter One List of Features Familiarizing Yourself with The TV ‹ Remote Control Sensor« VOL , + Stand by indicator Power CH and CH Devices Side Panel JacksDevices For private listening DVD Audio Inputs Input2 Rear Panel Jacks« Audio Inputs Input1 VOL -, VOL + Remote Control« Number buttons +100 Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF Antennas Cable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF Antennas Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All Channels Incoming Cable Splitter Unplug the cable or antenna from the back of the TV Connecting a VCR Connecting a Second VCR to Record from the TV Connecting a DVD Player Connecting a Camcorder Installing Batteries in the Remote Control Viewing the Menus Press the Power button on the remote controlTurning the TV On and Off Viewing the Menus and On-Screen Displays Press the Exit button to exit Selecting a Menu LanguagePress the Menu button to display the menu Memorizing the Channels Selecting the Video Signal-source Storing Channels in Memory Automatic Method Adding and Erasing Channels Manual Method Changing Channels Using the Channel ButtonsDirectly Accessing Channels Using the PRE-CH Button to select the Previous Channel Press the Menu button to display menu Customizing the Picture Using Automatic Picture Settings Customizing the Sound Adjusting the VolumeUsing Mute To increase or decrease the value of a particular item Using Automatic Sound SettingsPress the ˇ or ˆ button Press the Menu button to display the on-screen menu Setting the Clock Simply press Viewing a VCR or Camcorder Tape Press the ˇ and ˆ but- tons to adjust the fine tun- ing Fine Tuning Channels Press the or button to select Color Tone Selecting the Color Tone Changing the Screen Size Using the Surf Feature Press the or button to select MTS Choosing a Multi-Channel Sound MTS Soundtrack Auto Volume Extra Sound Settings PM appears to the right of the hour Setting the On/Off Timer Setting the Sleep Timer Viewing Closed Captions Chapter Five Identifying Problems Specifications Cleaning and Maintaining Your TVUsing Your TV in Another Country