Cooking / Reheating
One-stage cooking
This oven is preset at the factory for automatic operation.
Make sure the oven is plugged into a properly earthed electrical outlet and “ON” appears in the display window.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven and then close the door securely (The oven lamp will go off.).
1.Select the desired power level by pressing the Power Level Selector pad.
Result : The selected power level will be displayed in the display window.
2.Set the desired heating time by pressing the NUMBER pads.
Result : The selected time is displayed in the display window.
The maximum time according to each cooking power level can be referred to in the title “Power Levels ans Time Variations” on page 6. The NUMBER pads will not operate or respond when you press a cooking time exceeding the maximum value. It is not possible to set a cooking time for longer than the maximum time allowed on the chosen program. It is advisable to press CANCEL and to enter a new power level and cooking time.
3.Press 
button:
Result : The oven lamp and cooling fan will be turned on. Heating will start.
The time on digital display will count down.
When all time is elapsed, the end of cycle Beep Tone will sound 4 times and all heating will stop. The oven lamp will go off. For 1 min, the display shows ‘0‘ and the cooling fan will keep working in order to cool down the interior parts.
During the time, the fan will not stop even when you open the door. 1 min later it will stop. Food may be removed from oven whilst the fan is still running.
EN
Whilst in a heating cycle, one press on 
pad stops the oven. At this time, the Power Check Indicator “ON” starts blinking and goes off
when the 
pad or 
button is pressed again.
You can restart it by pressing the 
button or a second press on 
pad will cancel the selected program. While NOT in a heating cycle, one tap on 
pad cancels the selected program.
You can press +20sec pad one or more times in order to add the cooking time by 20 seconds. But you can not exceed the maximum time per power level allowed for power level selected.
When you first plug in the power cord, the oven beeps once and all the indicators show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops operating and the oven lamp automatically turns on for 1 min and goes off 1 min later. If you leave the oven door open for more than 1 min, the oven beeps once every minute and after 5 min the power source check indicator ‘ON’ appears in the display window.
5