How to Operate Memory Cooking
After having finished memory programming, just press the NUMBER pad of the memory number you want to select. The oven will automatically start heating according to the
1.Make sure the oven is plugged into a properly earthed electrical outlet and “ON” appears in the display window.
2.Open the door.
The oven lamp will be turned on.
3.Put the food into a suitable container, place it in the centre of the oven and then close the door securely.
Result : The oven lamp will go off.
4.Press NUMBER pad.
Result : The selected memory program automatically starts heating. But, NUMBER pad 1, 2, 3 operate after 2 seconds.
Double Quantity Pad Programming
1. Hold down | and then press | pad. Hold together | EN |
for 2 seconds. |
|
| |
|
|
| |
|
|
|
|
2.Select desired program code by using NUMBER pads.
3.Press NUMBER pads to set the magnification factor within the range from 1.00 to 9.99.
Default factor is 1.65 preset from the manufacturer for increasing the cooking time. Make sure that you set a correct factor between
1.00and 9.99 for each memory code number.
4.Press 
button.
Press pad to exit the programming mode.
Though you can successfully set a double quantity factor whose setting might result in excess of the maximum time allowed for each power level, the oven does not operate exceeding the maximum time.
11