12
ENG
Plug & Play Feature(depending on the model)
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1If the television is in Standby mode, press the POWER ( ) button
on the remote control.
Result: The message
Plug & Play
is displayed. It flickers for a
little while and then the Language menu is automatically
displayed.
2Press the or button to select required language. Press the
MENU ()
button to enter the language, and then the message
Ant. Input : Check
is displayed.
If any language is not selected on the
Language
menu, the
Language menu will be displayed about 30 seconds later.
3Make sure that the antenna is connected to the TV. And then press
the œor button to store the channels (refer to Storing the
Channels Automatically on page 14).
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4When searching and storing is complete, the
Time
menu is
displayed.
5Press the œor button to move to the hour or minute. Set the
hour or minute by pressing the or button (refer to Setting and
Displaying the Current Time on page 31).
6When you have finished, press the MENU ( ) button.
Result: The message
ENJOY YOUR WATCHING
is displayed, and
then the channel which has been stored will be
activated.
7If you want to reset this feature...
1Press the MENU()
button.
2Press the or button to select the
Function
, and then
press the œor button.
3Select the
Plug & Play
by pressing the or button, and
then press the œor button.
Result: The message
Plug & Play
is displayed.
Function
Language : English
Time
Plug & Play
Blue Screen : Off
Child Lock
Demonstration
Plug & Play
ENJOY YOUR WATCHING
Select Enter Exit
P 1
-- ---
471 MHz 48 %
Exit
Ant. Input : Check
Exit
Time
Clock 11 : 35
Move Exit
Language
English Português
Deusch Italiano
Français Sverige
Nederland Türkçe
Español EÏÏËÓÈο
Adjust Select
S56A_UI_ENG_EU 8/30/03 10:47 AM Page 12