Samsung Digimax 301 manual Imprinting date recording, Beep

Imprinting date recording

There is an option to include DATE/TIME on still images.
Date Imprinting
1. In any mode other than Voice Recording mode, press
the MENU button.
2. Press the LEFT/ RIGHT button and select the [SETUP]			SETUP
menu tab.
		DATE		OFF
3. Select the [IMPRINT] menu by pressing the UP/ DOWN
		TIME		DATE
button and press the RIGHT button.		IMPRINT		DATE&TIME
4. Use the UP and DOWN buttons to select the desired		BACK:			SET:OK
date imprint type, and then press the OK button.
- [OFF]	: The DATE & TIME will not be imprinted on the image file.
- [DATE]	: Only the DATE will be imprinted on the image file.
- [DATE&TIME]	: The DATE & TIME will be imprinted on the image file.

5. Press the menu button twice and the menu will disappear.

INFORMATION

The Date & Time are imprinted at the bottom right side of the still image.

The date will be imprinted as a DATE TYPE setting.

TIME is imprinted in the following way : [Hour : Minute : Second] and hours are shown using the 24 hour clock.

The imprint function is applied only to still images.

Beep

If you set the operation sound to ON, various sounds will be activated for camera startup, when buttons are pressed, and if there is a card error, so that you can be aware of the camera operation status.

Setting Operation Sounds

1.In any mode other than Voice Recording mode, press the MENU button.

2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3.Select the [BEEP] menu by pressing the UP/ DOWN button and press the RIGHT button.

4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.

- If [ON] is selected	: The buzzer will sound.
- If [OFF] is selected	: The buzzer will not sound.

SETUP

TIME

IMPRINT ON

BEEP OFF

BACK: SET:OK

62