DSB-4700F
OPERATING THE RECEIVER
1.5 SMATV Scanning
In case that several generations use Antenna and LNB in common, search the service the from 950 to 2150MHz.
●Select Searching Type “Automatic” or “Manual”.
●Select Scan Mode “All” or “Only Free”.
●You can input alternative symbol rate from 1st to 4th.
Note : 1. When your searching type is set to Automatic during SMATV scanning, you have only to enter the alternative symbol rate(1~7) you want.
2.When your searching type is set to Manual during SMATV scanning, you must enter both frequency and symbol rate.
3.DiSEqC switch can be supported for SMATV on ‘LNB Settings’. SMATV as the satellite on ‘LNB Settings’ should be selected for supporting DiSEqC switch.
When you select “Automatic”, STB will search all available channels based on symbol rates over whole frequencies. On the other hand, it will scan channels with exact information for symbol rate and frequency on “Manual”.
1.6 Reset to Factory Defaults
This is to recover the Factory set values in case the user has encountered some problems after changing any values of channel data and others which may be in error.
The screen display will be as follows:
At the request window,
if you press OK key, the receiver will be reset to factory default settings automatically.
Note : This cause your previous settings to be deleted!
All settings and information including channel data will be deleted.
OPERATING THE RECEIVER
2. Channel Organising
The “Channel Organising” menu has seven functions: This menu is for removing some channels from channel list which are related with designated Satellite or Transponder.
And it provides making favorite list and moving channel position as you want.
●Enter the PIN Code.
If you have not entered your own PIN Code 0000 applies, which was set at the factory.
2.1 Delete Satellite
●Select the desired satellite list you want to delete by pressing RED( i ) key.
●Press OK key for confirmation.
Note : This feature doesn’t delete satellite itself but deletes the list of channels registered at the selected Satellite.
2.2 Delete Transponder
●Select the desired transponder list you want to delete by pressing RED( i ) key.
●Press OK key for confirmation.
Note : This feature doesn’t delete transponder itself but deletes the list of channels registered at the selected transponder.
2.3 Delete Channel
●Select the desired channel you want to delete by pressing RED( i ) key.
●Press OK key for confirmation.
DSB-4700F
24 | D I G I T A L | S A T E L L I T E | R E C E I V E R | 25 |
