If the new dryer is installed into an existing exhaust system you must make sure:

•The exhaust system meets all local, state, and national codes.

•That a flexible plastic duct is not used.

•To Inspect and clean all lint buildup from inside the existing duct.

•The duct is not kinked or crushed.

•The exhaust hood damper opens and closes freely.

The static pressure in any exhaust system must not exceed 0.83 inches of water column, or be less than 0.

This can be measured with the dryer running with a manometer at the point where the exhaust duct connects to the dryer. A no-heat setting should be used. The dryer tumbler should be empty and the lint filter clean.

IMPORTANT TO INSTALLER

Please read the following instructions carefully before installing the dryer. These instructions should be kept for future reference.

REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES TO AVOID THE DANGER OF A CHILD WARNING SUFFOCATING.

LOCATION CONSIDERATIONS

The dryer should be located where there is enough space in front for loading the dryer, and enough space behind for the exhaust system. This dryer is factory-ready for rear exhaust. To exhaust out the bottom or the left, use the accessory exhaust kit. Instructions are included with the kit. It’s important to make sure the room has enough fresh air. The dryer must be located where there is no air-flow obstruction.

On gas dryers, adequate clearance as noted on the data plate must be maintained to ensure adequate air for combustion and proper dryer operation.

THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT WILL BE EXPOSED TO WATER AND/OR WEATHER. THE DRYER AREA IS TO BE KEPT CLEAR OF COMBUSTIBLE MATERIALS, GASOLINE, AND OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUSTIBLE LINT. THE AREA AROUND THE DRYER SHOULD BE KEPT LINT-FREE.

ALCOVE OR CLOSET INSTALLATION

The dryer must be exhausted to the outside to reduce the risk of fire when installed in an alcove or

WARNING closet.

•No other fuel-burning appliance should be installed in the same closet as the dryer.

•WARNING: To reduce the risk of fire, this dryer MUST BE EXHAUSTED TO THE OUTDOORS. See EXHAUST INFORMATION section.

•Minimum clearances between the dryer and adjacent walls or other surfaces are: 2” in front, 17” on top, 1” on either side, and 2.375” in the back.

•The closet front must have two unobstructed air openings for a combined minimum total area of 72 in² with 3” minimum clearance on the top and bottom. A louvered door with equivalent space clearance is acceptable.

01 Installing your dryer

Installing your dryer _9

DV337AEW-02453A-04_EN.indd 9

2007-07-23 ¿ÀÈÄ 1:47:21

Page 8 Page 10
Page 9
Image 9
Samsung DV328, DV337 user manual Important to Installer, Location Considerations, Alcove or Closet Installation
Page 8 Page 10

DV337, DV328 specifications

Samsung's DV328 and DV337 are two of the brand's innovative dryers designed to meet the modern needs of consumers while ensuring efficiency and convenience in laundry care. These models are part of Samsung's commitment to providing advanced home appliances that cater to a variety of drying requirements and preferences.

The Samsung DV328 dryer comes with a robust array of features aimed at enhancing the user experience. This model boasts a large capacity drum of up to 7.3 cubic feet, allowing users to easily dry larger loads of laundry in one go. This is especially beneficial for families or individuals with substantial laundry needs. The DV328 also features 14 different drying options, ensuring that each fabric type is cared for appropriately. From delicate settings for fine garments to robust options for heavy towels, this dryer is designed to handle it all.

The DV337 model builds on the foundation laid by its predecessor, offering several sophisticated technologies and functionalities. Key among these features is the Smart Care technology, which allows users to troubleshoot issues quickly and conveniently. By using a smartphone app, users can diagnose problems, ensuring minimal downtime and maintaining their dryer’s performance over the long term.

Furthermore, both models integrate the Eco Dry feature, which is designed to reduce energy consumption without sacrificing drying performance. By employing a combination of advanced heating technologies and optimized airflow, these dryers not only save on utility bills but also contribute to a more sustainable household.

The installation of a stainless-steel drum in both models ensures a longer lifespan and enhances the overall drying efficiency by reducing snagging of clothes. Additionally, their sleek designs and customizable features such as sensor dry technology allow users to achieve optimal drying results by minimizing the risk of over-drying and fabric damage.

Overall, Samsung's DV328 and DV337 dryers combine practicality with high-tech solutions, making them excellent choices for consumers looking to enhance their laundry experience. With an emphasis on efficiency, user-friendliness, and advanced care for a variety of fabrics, these dryers stand out in today's competitive market for home appliances.
Top Page Image Contents