3-WIRE system connections

1.Loosen or remove the center terminal block screw.

2.Connect the neutral wire (white or center wire) of the power cord to the center, silver-colored terminal screw of the terminal block. Tighten screw.

3.Connect the other wires to outer terminal block screws. Tighten screws.

4.Tighten the strain relief screws.

5.Insert the tab of the terminal block cover into your dryer’s rear panel slot. Secure the cover with a hold-down screw.

1. External ground connector 2. Neutral grounding wire (green/yellow) 3. Center silver-colored terminal block screw

4. Neutral wire (white or center wire)

5. 3/4” (1.9 cm) UL-listed strain relief

If converting from a 4-wire electrical system to a 3-wire, the ground strap must be

WARNING reconnected to the terminal block support to ground the dryer frame to the neutral conductor.

4-WIRE system connections

1.Remove the center terminal block screw.

2.Connect the ground wire (green or unwrapped) of the power cord to the external ground conductor screw.

3.Connect the neutral wire (white or center wire) of the power cord and the appliance ground wire (green with yellow stripes) under the central screw of the terminal block.

4.Connect the other wires to the outer terminal block screws. Tighten screws.

5.Tighten the strain relief screws.

6.Insert the tab of the terminal block cover into your dryer’s rear panel slot. Secure the cover with a hold-down screw.

1. External ground connector

2. Green or bare copper wire of power cord

3. 3/4 in. (1.9 cm) UL-listed strain relief

4. Center silver-colored terminal block screw

5.Grounding wire (green/yellow)

6.Neutral wire (white or center wire)

6.With a level, check your dryer and make necessary adjustments to the leveling legs.

7.At this time, make sure all gas connections (on gas models), exhaust and electrical connections are complete. Plug in your dryer, and check operation by using the checklist below.

8.(GAS MODELS ONLY)

The burner may not ignite initially due to air in the gas line. Allowing your dryer to operate on a heat setting will purge the line. If the gas does not ignite within 5 minutes, turn your dryer off and wait 5 minutes. Be sure the gas supply to your dryer has been turned on. In order to confirm gas ignition, check the exhaust for heat.

FINAL INSTALLATION CHECKLIST

Dryer is plugged into electrical outlet and properly grounded.

Exhaust ductwork is hooked up and joints taped.

Plastic flexible duct is NOT used.

Used rigid or stiff-walled flexible metal vent material.

Dryer is level with all legs firmly on the floor.

Gas models – gas is turned on with no gas leaks.

Start your dryer to confirm that it runs, heats, and shuts off.

Installing your dryer _15

01 Installing your dryer

DV337AEW-02453A-04_EN.indd 15

2007-07-23 ¿ÀÈÄ 1:47:22

Page 15
Image 15
Samsung DV328, DV337 user manual Final Installation Checklist, Wire system connections

DV337, DV328 specifications

Samsung's DV328 and DV337 are two of the brand's innovative dryers designed to meet the modern needs of consumers while ensuring efficiency and convenience in laundry care. These models are part of Samsung's commitment to providing advanced home appliances that cater to a variety of drying requirements and preferences.

The Samsung DV328 dryer comes with a robust array of features aimed at enhancing the user experience. This model boasts a large capacity drum of up to 7.3 cubic feet, allowing users to easily dry larger loads of laundry in one go. This is especially beneficial for families or individuals with substantial laundry needs. The DV328 also features 14 different drying options, ensuring that each fabric type is cared for appropriately. From delicate settings for fine garments to robust options for heavy towels, this dryer is designed to handle it all.

The DV337 model builds on the foundation laid by its predecessor, offering several sophisticated technologies and functionalities. Key among these features is the Smart Care technology, which allows users to troubleshoot issues quickly and conveniently. By using a smartphone app, users can diagnose problems, ensuring minimal downtime and maintaining their dryer’s performance over the long term.

Furthermore, both models integrate the Eco Dry feature, which is designed to reduce energy consumption without sacrificing drying performance. By employing a combination of advanced heating technologies and optimized airflow, these dryers not only save on utility bills but also contribute to a more sustainable household.

The installation of a stainless-steel drum in both models ensures a longer lifespan and enhances the overall drying efficiency by reducing snagging of clothes. Additionally, their sleek designs and customizable features such as sensor dry technology allow users to achieve optimal drying results by minimizing the risk of over-drying and fabric damage.

Overall, Samsung's DV328 and DV337 dryers combine practicality with high-tech solutions, making them excellent choices for consumers looking to enhance their laundry experience. With an emphasis on efficiency, user-friendliness, and advanced care for a variety of fabrics, these dryers stand out in today's competitive market for home appliances.