installing your dryer

DUCTING REQUIREMENTS

Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct.

Do not use a smaller duct.

Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation. Lint accumulation should be cleaned regularly.

If a flexible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a flexible duct with a thin foil wall. Serious blockage can result if the flexible metal duct is bent too sharply.

Never install any type of flexible duct in walls, ceilings, or other concealed spaces.

Keep the exhaust duct as straight and short as possible.

Secure joints with duct tape. Do not use screws.

DO NOT EXHAUST DRYER INTO ANY WALL, CEILING, CRAWL SPACE, OR CONCEALED SPACE OF A BUILDING, GAS VENT, OR ANY OTHER COMMON DUCT OR CHIMNEY.

THIS COULD CREATE A FIRE HAZARD FROM LINT EXPELLED BY THE DRYER.

Plastic flexible duct can kink, sag, be punctured, reduce airflow, extend drying times, and affect dryer operation.

Exhaust systems longer than recommended can extend drying times, affect machine operation, and may collect lint.

The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and entry of wildlife. Never use an exhaust hood with a magnetic damper.

The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the ground or other obstruction. The hood opening should point down.

Never install a screen over the exhaust outlet.

To avoid lint buildup, do not exhaust the dryer directly into a window well. Do not exhaust under a house or porch.

If exhaust ductwork must run through an unheated area, the duct should be insulated and slope slightly down towards the exhaust hood to reduce condensation and lint buildup.

Inspect and clean the interior of the exhaust system at least once a year. Unplug the power cord before cleaning.

Check frequently to be sure the exhaust hood damper opens and closes freely.

Check once per month, and clean at least one time per year. Note: If clothes are not getting dry, then check ducting for obstructions.

ELECTRIC AND GAS DRYER

 

Weather Hood Type

Recommended

Use only for short-run installation

 

4” (10 .16 cm)

2.5” (6.35 cm)

 

 

 

 

 

No. of 90° elbows

Rigid

Metallic Flexible*

Rigid

Metallic Flexible*

 

 

 

 

 

0

24.4 m (80 ft.)

12.4 m (41 ft.)

22.6 m (74 ft.)

10.1 m (33 ft.)

 

 

 

 

 

1

20.7 m (68 ft.)

11.2 m (37 ft.)

18.9 m (62 ft.)

8.8 m (29 ft.)

 

 

 

 

 

2

17.4 m (57 ft.)

10.1 m (33 ft.)

15.5 m (51 ft.)

7.6 m (25 ft.)

 

 

 

 

 

3

14.3m (47 ft.)

9.0 m (29 ft.)

12.5 m (41 ft.)

6.5 m (21 ft.)

 

 

 

 

 

*Do not use non-metallic flexible duct.

8_ Installing your dryer

DV337AEW-02453A-04_EN.indd 8

2007-07-23 ¿ÀÈÄ 1:47:21

Page 8
Image 8
Samsung DV337, DV328 user manual Ducting Requirements, Electric and GAS Dryer, Weather Hood Type

DV337, DV328 specifications

Samsung's DV328 and DV337 are two of the brand's innovative dryers designed to meet the modern needs of consumers while ensuring efficiency and convenience in laundry care. These models are part of Samsung's commitment to providing advanced home appliances that cater to a variety of drying requirements and preferences.

The Samsung DV328 dryer comes with a robust array of features aimed at enhancing the user experience. This model boasts a large capacity drum of up to 7.3 cubic feet, allowing users to easily dry larger loads of laundry in one go. This is especially beneficial for families or individuals with substantial laundry needs. The DV328 also features 14 different drying options, ensuring that each fabric type is cared for appropriately. From delicate settings for fine garments to robust options for heavy towels, this dryer is designed to handle it all.

The DV337 model builds on the foundation laid by its predecessor, offering several sophisticated technologies and functionalities. Key among these features is the Smart Care technology, which allows users to troubleshoot issues quickly and conveniently. By using a smartphone app, users can diagnose problems, ensuring minimal downtime and maintaining their dryer’s performance over the long term.

Furthermore, both models integrate the Eco Dry feature, which is designed to reduce energy consumption without sacrificing drying performance. By employing a combination of advanced heating technologies and optimized airflow, these dryers not only save on utility bills but also contribute to a more sustainable household.

The installation of a stainless-steel drum in both models ensures a longer lifespan and enhances the overall drying efficiency by reducing snagging of clothes. Additionally, their sleek designs and customizable features such as sensor dry technology allow users to achieve optimal drying results by minimizing the risk of over-drying and fabric damage.

Overall, Samsung's DV328 and DV337 dryers combine practicality with high-tech solutions, making them excellent choices for consumers looking to enhance their laundry experience. With an emphasis on efficiency, user-friendliness, and advanced care for a variety of fabrics, these dryers stand out in today's competitive market for home appliances.