operating instructions, tips
2
Digital Graphic Display
The display window shows the estimated time remaining in the cycle after the Start/Pause button is pressed. The estimated time remaining may fl uctuate as the cycle progresses. ( 
)
The Drying light will illuminate and remain lit until the cycle is complete. (
) When your dryer is in the 
) When your dryer is in the wrinkle prevent phase, the Wrinkle Prevent light will illuminate. (
)
When the cycle is complete, “End” will appear in the display panel until the dryer door is opened or the Power button is pushed. ( 
)
If your dryer is paused during a cycle, the indicator lights will blink until the Start/ Pause button is pressed.
3
Select Cycle Option
Wrinkle Prevent
The indicator light above the pad will illuminate when Wrinkle Prevent is selected. The load is dry, and can be removed at any time during the Wrinkle Prevent cycle. Mixed Load Bell - This is an alarm that notifi es the user when the average dry level is damp dry (80 % dried). This is useful when the laundry contains various types of clothing you do not want to dry completely. An alarm sounds for fi ve (5) seconds while continuing to perform the cycle.
This function can only be selected in the Sensor Dry course, and the dry level can only be selected from Cupboard Dry to Extra Dry.
Delay End : You can set the dryer to fi nish your drying cycle automatically at a later time, choosing a delay of between 4 to 24 hours (in 1 hour increments). The hour displayed indicates the time at which the dry will be fi nished. (
)
1.Manually or automatically set your drying machine according to the type of laundry you are drying.
2.Press the Delay End button repeatedly until the required delay time is set. If the delay time is set, the “Delay End” function becomes ON state.
3.Press the Start/Pause button. The “Delay End ” indicator will blink and the clock will begin counting down until it reaches the set time.
4.To cancel a Delay End function, press the Power button and then turn the dryer on again.
My Cycle : Choose your favorite cycle including cycle, temp, dry level option, etc. (See page 22 for detail.)
Rack Dry : Rack Dry is available at Time Dry cycle. Temperature will be set only to Extra Low. (See page 23 for detail.)
Adjust Time – Time can be added or subtracted from the automatically set times in the Manual Dry cycles (Time Dry, Quick Dry, Air Fluff cycles).
To add or subtract time from the cycle, press the Adjust Time arrow pad up or down until the desired time is displayed.
4
Dry Level Selection Button
To select the dry level in the Sensor Dry cycles, press the Dry Level button. An indicator light will illuminate next to the desired dryness level.
Press the button repeatedly to scroll through the settings.
