Samsung DV520AE-02836A-01 Digital Graphic, Display, Dry Level, Selection Button, Temp Selection

		The display window shows the estimated time remaining in the cycle and the
		chosen cycle after the Start/Pause button is pressed. The estimated time
		remaining may fluctuate as the cycle progresses.
		The “DRYING” and the chosen cycle will be showed by turn in the display until
	Digital Graphic	the cycle is complete.
2		When your dryer is in the cool-down phase, the “COOLING” will be showed.
	Display
		When the cycle is complete, “END” appears in the display panel until the dryer
		door is opened, the Power, Close or Start button is pressed or about 5 minutes
		have passed.
		If your dryer is paused during a cycle, the display doesn’t change showing the
		chosen cycle and remaining time until the Start/Pause button is pressed.
		To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,
		press the Dry Level button. An indicator light will illuminate next to the desired
		dryness level.
3	Dry Level	Press the button repeatedly to scroll through the settings. Larger or bulkier loads
	Selection Button	may require the Very Dry or More Dry setting for complete dryness.
		The Less Dry setting is best suited for lightweight fabrics or for leaving some
		moisture in the clothing at the end of the cycle. Damp Dry is designed to partially
		dry items. Use for items that lay flat or hang to dry.
		To select the correct temperature for the load, press the Temp button. An indicator
		light will illuminate next to the desired temperature. Press the button repeatedly to
		scroll through the settings.
	Temp Selection	High – For sturdy cottons or those labeled Tumble Dry.
4		Medium – For permanent press, synthetics, lightweight cottons, or items labeled
	Button
		Tumble Dry Medium.
		Med Low – For lower heat than Medium to dry synthetic or washable knit fabrics.
		Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.
		Extra Low – Provides the lowest heated dry temperature possible.
		When using Manual Dry cycles, time can be adjusted by pressing the time
5	Time Selection	selection button.
	Button	During the Sensory Dry cycle, the time light indicator is off because exact drying
		times are determined by fluctuating humidity levels.
		When the cycle is complete, a chime will sound.
6	Signal Selection	When the Wrinkle Prevent option is selected, the chime will sound intermittently.
	Button	Adjust the volume of the chime or turn it off by pressing the Signal button.
		Press the button repeatedly to scroll through the choices.
7	Delay Start	Any cycle can be delayed for up to 24 hours in one-hour increments. Displayed
	Button	hour indicates the time at which the wash will be started

02 operating Instructions, tips

operating Instructions, tips _25

DV520AE-02836A-01_EN.indd 25

2010-08-24 ¿ÀÈÄ 3:29:40