DUCTING REQUIREMENTS

Use a 4-inch (10.2 cm) diameter rigid aluminum or rigid galvanized steel duct.

Do not use a smaller duct.

Ducts larger than 4 inches (10.2 cm) in diameter can result in increased lint accumulation. Lint accumulation should be cleaned regularly.

If a flexible metal duct must be used, use the type with a stiff sheet metal wall. Do not use a flexible duct with a thin foil wall. Serious blockage can result if the flexible metal duct is bent too sharply.

Never install any type of flexible duct in walls, ceilings, or other concealed spaces.

Keep the exhaust duct as straight and short as possible.

Secure joints with duct tape. Do not use screws.

Plastic flexible duct can kink, sag, be punctured, reduce airflow, extend drying times, and affect dryer operation.

Exhaust systems longer than recommended can extend drying times, affect machine operation, and may collect lint.

The exhaust duct should end with an exhaust hood with a swing-out damper to prevent back drafts and entry of wildlife. Never use an exhaust hood with a magnetic damper.

The hood should have at least 12 inches (30.5 cm) of clearance between the bottom of the hood and the ground or other obstruction. The hood opening should point down.

Never install a screen over the exhaust outlet.

To avoid lint buildup, do not exhaust the dryer directly into a window well. Do not exhaust under a house or porch.

If exhaust ductwork must run through an unheated area, the duct should be insulated and slope slightly down towards the exhaust hood to reduce condensation and lint buildup.

Inspect and clean the interior of the exhaust system at least once a year. Unplug the power cord before cleaning.

Check frequently to be sure the exhaust hood damper opens and closes freely.

Check once per month, and clean at least one time per year. Note: If clothes are not getting dry, then check ducting for obstructions.

Do not exhaust dryer into any wall, ceiling, crawl space, or concealed space of a building, gas vent, or any other common duct or chimney. This could create a fire hazard from lint expelled by the dryer.

ELECTRIC AND GAS DRYER

 

Weather Hood Type

Recommended

Use only for short-run installation

 

4” (10 .16 cm)

2.5” (6.35 cm)

 

 

 

 

 

No. of 90° elbows

Rigid

Metallic Flexible*

Rigid

Metallic Flexible*

 

 

 

 

 

0

24.4 m (80 ft.)

12.4 m (41 ft.)

22.6 m (74 ft.)

10.1 m (33 ft.)

 

 

 

 

 

1

20.7 m (68 ft.)

11.2 m (37 ft.)

18.9 m (62 ft.)

8.8 m (29 ft.)

 

 

 

 

 

2

17.4 m (57 ft.)

10.1 m (33 ft.)

15.5 m (51 ft.)

7.6 m (25 ft.)

 

 

 

 

 

3

14.3m (47 ft.)

9.0 m (29 ft.)

12.5 m (41 ft.)

6.5 m (21 ft.)

 

 

 

 

 

*Do not use non-metallic flexible duct.

01 installing your dryer

installing your dryer _11

DV520AE-02836A-01_EN.indd 11

2010-08-24 ¿ÀÈÄ 3:29:32

Page 11
Image 11
Samsung DV520AE-02836A-01 user manual Ducting Requirements, Electric and GAS Dryer, Weather Hood Type

DV520AE-02836A-01 specifications

The Samsung DV520AE-02836A-01 is an exceptional electric dryer that combines cutting-edge technology with user-friendly features to provide superior laundry performance. Designed for modern households, this model excels in efficiency, convenience, and style, making it a worthwhile addition to any laundry room.

One of the standout features of the DV520AE model is its advanced moisture sensing technology. This system boasts built-in sensors that detect moisture levels in your clothes, automatically adjusting drying times to ensure optimal drying without risking over-drying. This not only helps to protect your fabrics but also leads to energy savings, as the dryer utilizes only the necessary time to achieve the desired dryness.

Equipped with a large capacity drum, the DV520AE can handle larger loads, making it especially efficient for families or those with heavy laundry demands. This spacious drum not only accommodates sizable loads but also allows for better air circulation, resulting in more even drying and less wrinkling. Additionally, its sleek design and elegant finish make it an attractive addition to any laundry space.

The Samsung DV520AE features a variety of drying cycles tailored to suit different fabric types and laundry needs. These include specialized cycles for delicates, heavy items, and mixed fabrics, ensuring each load receives the care it requires. Furthermore, the dryer includes a steam function that helps reduce wrinkles and eliminate odors, giving clothes a fresh, pressed appearance without the need for ironing.

Another notable characteristic of this model is the Eco Dry technology, which utilizes innovative methods to reduce energy consumption while maintaining high drying performance. This is aligned with Samsung's commitment to sustainability and energy efficiency, helping consumers save on utility bills while being environmentally conscious.

The DV520AE also incorporates a smart control system, allowing users to start, stop, and monitor their drying cycles remotely via a smartphone app. This feature enhances convenience, enabling users to manage their laundry with ease even when they are on the go.

In summary, the Samsung DV520AE-02836A-01 dryer is a versatile and technologically advanced appliance that meets the demands of today’s busy lifestyles. With its moisture sensing technology, large capacity drum, diverse drying cycles, steam function, Eco Dry system, and smart control capabilities, it stands out as an excellent option for anyone looking to enhance their laundry experience.