C O N N E C T I O N S
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an Optical cable (not included), connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (OPTICAL) jack of the Amplifier.
If using a Coaxial cable (not included), connect the DIGITAL
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the HDMI, COMPONENT or VIDEO OUT jacks on the rear of the DVD player to the VIDEO, COMPONENT or
or
Optical Cable (not included)
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select the audio input your DVD player is connected to in order to hear sound. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Note
Coaxial Cable (not included)
Dolby digital or
DTS amp
-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.
-Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 49 to 50)
-The position of jacks may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
-Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.
