Samsung DVD-1080P9/MEA, DVD-1080P9/SAM manual Setting Up Anynet+HDMI-CEC, TV Menu

changing setup menu

Setting Up the

Anynet+(HDMI-CEC)

Anynet+ is a function that can be used to operate the unit using a Samsung TV remote control, by connecting the DVD 1080P9 to a SAMSUNG TV using a HDMI Cable. (see page 12 to 13) (This is only available with SAMSUNG TVs that support Anynet+.

Select On when you connecting the DVD 1080P9 with Samsung TV that support Anynet+.

DVDP

V	iew TV		®
Select Device			®
Record			®
Menu on Device			®
Device Operation			®
Receiver		: Off	®
Setup			®
Move		ENTER
Exit

TV Menu

To make the setup menu disappear, press the MENU button.

1.With the unit in Stop mode, press the MENU button.

2.Press the π/† buttons to select Setup, then press the ® or ENTER button.

Language Setup		®
Audio Setup		®
Display Setup		®
Parental Setup :		®
DivX(R) Registration		®
Anynet+(HDMI-CEC) : On
Enter	Return	Menu

3.Press the π/† buttons to select Anynet+(HDMI-CEC), then press the ® or ENTER button.

•You can operate the DVD Player by using TV remote control. (TV buttons that can be used to control the DVD Player :

, , , , , and ,

buttons, buttons.

-Select Device : Use this option to select device.

-Menu on Device : Same as MENU button on the DVD Player remote control.

-Device Operation : Same as INFO button on the DVD Player remote control.

Language Setup			®
Audio Setup			®
Display Setup			®
Parental Setup :			®
DivX(R) Registration			®
Anynet+(HDMI-CEC) : On
Enter	Return	Menu

4.Set the Anynet+(HDMI-CEC) to “On” on your DVD Player, then press the ® or ENTER button.

Language Setup			®
Audio Setup			®
Display Setup			®
Parental Setup :			®
DivX(R) Registration			®
	Off
Anynet+(HDMI-CEC)√ On : On
Enter	Return	Menu

Note

•By pressing the PLAY button of the unit while watching TV, the TV screen will change to the play screen.

•If you play a DVD when the TV power is off, the TV will power On.

•If you turn the TV off , the DVD Player will power off automatically.

•If you change the HDMI to other sources --(Compos ite,Component,... etc) in TV while playing the DVD disc, the DVD Player will stop playing.

5.Set the Anynet+ function at your TV. (See the TV instruction manual for more information.).

•When you press Anynet+ button on the TV remote control, the below OSD will appear.

32_ changing setup menu