Description-Rear Panel

DVD-E137A/DVD-E137B/DVD-E237

RL

1

2

3

4

5

6

DVD-E437

S-VIDEO

VIDEO OUT

SELECT

SCART

Description-Rear Panel

SETUP

Rear Panel

1.DIGITAL AUDIO OUT JACKS

•Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital, receiver. Use to connect to an A/V Amplifier that contains a Dolby Digital, MPEG-2 or DTS decoder.

2.ANALOG AUDIO OUT JACKS

•Connect to the Audio input jacks of your television, audio/video receiver.

3.VIDEO OUT JACKS

•Use a video cable to connect to the Video input jack on your television.

4.S-VIDEO OUT JACK

•Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality picture. The S-Video must be selected in the VIDEO OUT SELECT.

5.VIDEO OUT SELECT SWITCH

•Use the switch to set video out. If Scart jack is selected, S-Video may not work. If S-Video is selected, Scart jack may not work.

6.SCART AV1 JACK

•Connect to a TV with scart input jack.

7.SCART AV2 JACK

•Connect to a video recorder or other equipment.

1

2

3

4

5

6

7

NOTE

* Select the VIDEO OUT SELECT switch in the Stop or Power Off mode.

12

13

ENGENG