Deciding How to Connect DHR(DVD HDD Recorder)
Connecting DHR(DVD HDD Recorder) to the TV using the Coaxial Cable
You must take into account various factors when connecting audio or video systems:
◆Types of connectors available on your systems
◆Systems connected permanently to the DHR (satellite receiver for example) or temporarily (camcorder for example)
Your DHR is equipped with the following connectors.
Connector | Location | Type | Direction | Recommended Use |
AV1 (EURO AV) | Rear | SCART | In/Out | ◆ Television |
AV2 | Rear | SCART | In/Out | ◆ Satellite receiver |
|
|
|
| ◆ CANAL/DECODER |
|
|
|
| ◆ Other VCR/DVD |
Audio input | Rear | Audio RCA | In | ◆ Audio in for |
Rear | In | ◆ | ||
input |
|
|
|
|
To receive television programs a signal must be received from one of the following sources:
◆An outdoor aerial
◆An indoor aerial
◆A cable television network
◆A satellite receiver
➢Make sure that both the television and the DHR are switched off before connecting the cables.
1Remove the aerial or network input cable from the television.
2Connect this cable to the 75Ω coaxial jack marked 
on the rear of your DHR.
3 | Plug the coaxial cable supplied into the |
| TV |
| jack on your DHR. |
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
4Plug the other end of the coaxial cable into the connector previously used for the aerial on the television.
5To obtain better quality pictures and sound on your television, you can also connect your DHR to the television via the SCART cable (see section below) if your television is equipped with this type of connection.
2 |
TV
3 |
4
Audio output | Rear | Audio RCA | Out | ◆ LINE Audio out |
VIDEO output | Rear | RCA | Out | ◆ LINE Video out |
Rear | Out | ◆ | ||
output |
|
|
|
|
Digital AUDIO | Rear | Optical | Out | ◆ Digital Audio out |
output |
|
|
|
|
|
| Coaxial |
|
|
OUT TO TV | Rear | 75 Ω | Out | ◆ Television |
|
| Coaxial |
|
|
IN FROM ANT. Rear | 75 Ω | In | ◆ Aerial | |
|
| Coaxial |
| ◆ Cable television network |
|
|
|
| ◆ Satellite receiver |
☛Whenever you connect an audio or video system to your DHR, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
18
Connecting DHR(DVD HDD Recorder) to the TV using the SCART Cable
Aerial |
TV |
2 |
3 |
SCART Cable |
RF coaxial cable |
You can connect your DHR to the television using the SCART cable if the appropriate input is available on the television. You thus:
◆Obtain better quality sound and pictures
◆Simplify the setting up procedure of your DHR
➢◆ Regardless of the type of connection chosen, you must always connect the coaxial cable supplied. Otherwise, no picture will be visible on the screen when the DHR is switched off.
◆ Make sure that both the television and the DHR are switched off before connecting the cables.
1Connect the coaxial cable as indicated in the above section.
2Connect one end of the SCART cable to the AV1 (EURO AV) jack on the rear of the DHR.
3Plug the other end into the appropriate connector on the television.
19
