Samsung DVD-HR721/EUR Digital Output, Mode Compatibility, Dynamic Compression, Output setting

Digital Output

1.PCM : Select this when your equipment is not decode Dolby Digital compatible.

2.Bitstream : Outputs Dolby Digital (or MPEG-2) audio as bitstream. Select this when your AV receiver or AV amplifier has a Dolby Digital (or MPEG-2) Decoder.

■Digital output setting is equally applied to both Dolby Digital and MPEG-2 audio.

NOTE	LPCM sound track is always outputted as
	PCM. It has no relation with Digital
	Output setting.

■Be sure to select the correct Digital Output or you will hear no sound or a loud noise.

V-Mode Compatibility

This feature is about the setup for selecting audios when recording the NICAM STEREO (Multi-audio) broadcasting on HDD. It does not affect to the direct DVD recording of a programme.

1.Off : Both “DUAL L” and “DUAL R” of the multi- audio broadcasting are recorded on HDD.Titles recorded on HDD under such setup status cannot be copied to V mode (DVD-RW/-R).

2.On : Either “DUAL L” or “DUAL R” of the multi- audio broadcasting is recorded on HDD.Titles recorded on HDD under such setup status can be copied to DVD-R or DVD-RW (V mode). “DUAL L” and “DUAL R” options can be selected from “Audio Selection.”

DTS

1.	Off : Doesn’t output DTS signal. Select this
	when your AV receiver or AV amplifier
	does not have DTS decoder.
2.	On : Outputs DTS Bitstream via digital output
	when you play DTS track. Select this only

HDD

Title

Music

Photo

Programme

Setup

MOVE

			Audio
Digital Output		: PCM	√
DTS		: Off	√
Dynamic Compression	: On		√
V-Mode Compatibility	:	Off
		On

SELECT RETURN EXIT

System Setup

when your AV receiver (or AV amplifier)

have DTS decoder.

■ When DTS soundtrack is played, sound does not output from AV Audio Output.

NOTE

HDD

Title

Music

Photo

Programme

Setup

MOVE

			Audio
Digital Output		: PCM	√
DTS		: Off	√
Dynamic Compression		: On	√
V-Mode Compatibility		: On	√
Audio Selection		: DUAL L	√
SELECT	RETURN	EXIT

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

1.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

2.Off : You can enjoy the movie with the standard Dynamic Range.

English - 39