Samsung DVD-HR721/XEG manual Setting up Progressive scan, If the P.SCAN button on the HDD & DVD

Setting up the

Progressive scan

If your TV supports Progressive Scan, press the P.SCAN button on the front of the HDD & DVD RECORDER.

To view ‘Progressive scan mode’, first connect the component cable.(See page 22)

Be sure the Component cables are connected properly.

1	With the unit in Stop mode, press the P.SCAN button
	on the front of the HDD & DVD RECORDER.
	The message “Press [Yes] to confirm Progressive

3	The message “Video Output Mode Progressive
	Scan” will appear.

The video will now be Progressive Scan.

Video Output Mode

Progressive Scan

■ If the P.SCAN button on the HDD & DVD

Setup	scan mode. Otherwise, press [No]” will appear.
	Press the œ √ buttons to select Yes , and then
	press the OK button.

NOTE

RECORDER’s front panel is pressed during playback, the message “This function is possible only on stop mode” appears on the screen.

System
		Press [Yes] to confirm Progressive scan mode.
		Otherwise, press [No]
			Yes	No
2	The message “Please, set your TV to Progressive
	input. To deactivate, press [STOP] key.” will
	appear. Press the OK			button.

Please, set your TV to Progressive input,

To deactivate, press [STOP] key.

OK

■Progressive setting is only available when the HDD & DVD RECORDER is in stop mode.

42 - English