Samsung DVD-HR725 instruction manual Video, Timer Recording, Sound, No audio output

Video

The disc revolves, but no image or bad quality images is displayed.

Timer Recording

Timer lamp flickers.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Checkpoint 4

Be sure that the Video Setting is properly set. (See pages 40~41)

Check whether there is damage to or any foreign material on your disc.

Some low quality discs may not play properly.

If scenes change from dark to bright suddenly, the screen may shake

Checkpoint 1

Checkpoint 2

Check there is enough space in the disc or HDD for recording.

Check whether the current disc is recordable or not.

Make sure to check before the start time of recording.

vertically temporarily, but this is not a fault.

Timer recording does not work properly.

Checkpoint 1

Re-check the recording time and the

Sound

No sound.

Checkpoint 1 Are you watching a programme in

Checkpoint 2

end time settings again.

Recording will be cancelled if the power is interrupted due to a power failure or another similar reason while recording.

slow or skip mode?

If you are playing a programme at a speed other than normal speed, sound will not be heard.

HDMI

No HDMI output.

Checkpoint 2

Checkpoint 3

Checkpoint 4

Check the connections and settings. (See pages 22, 39)

Check whether the disc is damaged. Clean the disc, if necessary.

Check whether the disc is inserted correctly with the label facing up.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Check whether the mode is stop mode or not. You can switch HDMI mode in stop mode.

Check the Video output is HDMI enabled.

Check the connection between the

Reference	No audio output.
	Checkpoint 1	Check whether you have selected

the correct digital output options in the Audio Output Options menu. (See page 39)

130 - English

TV and the HDMI jack of the HDD &

DVD RECORDER.

Checkpoint 4 See if your TV supports HDMI.