Samsung DVD-HR725 instruction manual Plug & Auto Setup

Plug & Auto Setup

Your HDD & DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your HDD & DVD RECORDER will then be ready for use.

	1	Connect the RF cable as indicated on page 19.
		(Connecting Your HDD & DVD RECORDER to the
		TV Using the RF Cable and scart cable.)
		To use HDMI cable, make the cable connection
		before plugging in the power cord or after finishing
		the “plug & autosetup.” Do not connect the HDMI
Setup		cable while the “plug & autosetup” is progressing.
	2	Plug the HDD & DVD RECORDER into the mains.
System		“AUTO” in the front panel display flickers.

5 After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. If you do not want to do auto clock setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

6 Wait until current date and time are displayed automatically. If you want to exit auto clock setting, press MENU button.

Please wait. Now setting the clock.

If you want to exit clock setting,

press the [MENU] button.

3 Press the OK button to start the auto setup. 7 Check the date and time.

Auto setup will be started.

Check antenna and TV cable connection.

Yes

Time	Date	Auto clock
No
12 : 00	01 / JAN SAT	2005 On

4 Auto channel scan will be started.

Channel Scan

Scanning...

10%

•The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found.

•if it is : Correct, press OK button then the date and time will be saved. If you don't press theOK button, the date and time will be saved automatically after 5 seconds.

•if it is : Incorrect, input correct Time, Date, Year using …†œ √ buttons or Number buttons. Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually. (See page 27)

26 - English