Samsung DVD-HR725 instruction manual Case 2 Connecting to an S-Video output jack

Case 2 : Connecting to an S-Video output jack

1.Connect an S-Video cable (not included) between the S-VIDEO OUT jack on HDD & DVD RECORDER and S-VIDEO INPUT jack on your TV (or AV amplifier).

• You will enjoy high quality images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier).

Case 3 : Component Video output jacks

1. Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on HDD & DVD RECORDER and COMPONENT IN(Y,PB,PR) jacks on your TV.

• You will enjoy high quality and accurate colour

reproduction images.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
	Connecting
and AUDIO IN jacks on TV (or AV amplifier).
(See pages 22).
Press the input selection on your TV remote
control until the Component signal from the HDD
& DVD RECORDER appears on your TV screen.	&
3. After connecting, refer to the pages 41~43.
	Setting Up

green	red	blue	green
blue
red

■ Consult your TV User’s Manual to find

NOTE

out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

■Make sure that the colour coded connections match. The Y, PB, PR component output jacks of your HDD & DVD RECORDER must be connected to the exact corresponding component input jacks on your TV.

■Progressive setting is only available when the Video Out is set to Component. (See pages 41~43)

English - 21