Connecting HDMI/DVI to a

 

CAUTION

 

connection before plugging in the power

 

 

 

 

 

To use HDMI cable, make the cable

 

 

TV

 

 

 

cord or after finishing the “plug &

 

 

 

 

 

 

 

 

 

 

autosetup.” Do not connect the HDMI

 

 

 

 

 

cable while the “plug & autosetup” is

 

 

 

 

 

 

progressing.

 

 

 

 

 

Progressive scan automatically activates

 

 

 

If your TV has a HDMI/DVI input, connect HDMI/DVI

 

 

 

when HDMI is connected.

 

 

If your TV does not have Bitstream

Adapter cable to a TV. You will enjoy the best quality

 

 

 

 

 

decoder, you must set the digital audio

images and sounds.

 

 

 

 

 

 

output to PCM in order to watch through

 

 

 

 

 

 

 

 

Case 1 : Connecting to a TV with HDMI Jack

 

 

 

the HDMI output. (See pages 38~39)

 

 

Depending on the HDMI device (TV/HDMI

 

 

Case 2 : Connecting to a TV with DVI Jack

 

 

 

 

 

Receiver) you use, audio may not be

 

 

 

 

 

 

 

 

Case 1 : Connecting to a TV with

 

 

 

supported. If TV/HDMI Receiver does not

 

 

 

 

 

 

 

 

 

 

support Dolby digital, Audio output is not

 

 

HDMI Jack

 

 

 

available when you set Digital output as

 

 

 

 

 

 

'Bitstream' in Audio setup menu. In this

Using the HDMI cable connect the HDMI OUT

 

 

 

case, set the digital audio output to PCM.

 

 

jack on the rear of the HDD & DVD RECORDER to

 

 

 

If TV/HDMI Receiver does not support

 

 

 

 

 

DTS, Audio output is not available when

 

 

the HDMI IN jack of your TV.

 

 

 

 

 

 

 

 

you play disc in DTS format.

Press the input selector on your TV remote control

 

 

 

 

 

You can switch from the HDMI output to

 

 

until the HDMI signal from the HDD & DVD

 

 

 

 

 

 

 

other output only in stop mode.

 

 

 

 

 

 

RECORDER appears on your TV screen.

Connecting & Setting Up

Case 2 : Connecting to a TV with DVI Jack

Using the DVI Adapter Cable, connect the HDMI OUT jack on the rear of the HDD & DVD RECORDER to the DVI IN jack of your TV.

Using the audio cables, connect the AUDIO (red and white) OUT jacks on the rear of the HDD & DVD RECORDER to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD RECORDER and TV.

Press the input selector on your TV remote control until the DVI signal from the HDD & DVD RECORDER appears on your TV screen.

red

white

white

red

HDMI (High Definition Multimedia

NOTE Interface)

HDMI is an interface to enable the digital transmission of video and audio data with just a single connector. Since HDMI is based on DVI, it is completely compatible with DVI. The only difference between HDMI and DVI is that HDMI supports multi-channel audio. Using HDMI, the HDD & DVD RECORDER transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

English - 23

Page 23
Image 23
Samsung DVD-HR725 instruction manual Case 1 Connecting to a TV with, Hdmi Jack, Case 2 Connecting to a TV with DVI Jack