Connecting & Setting Up

Other type of connecting the Video output cable

There are several ways to output video signal not using scart cables. Select one of the following video connecting that best suits you below.

Case 1 : Connecting to a Video (Composite) output jack

Case 2 : Connecting to an S-Video output jack

Case 3 : Component Video output jacks

S-Video, Component video and Progressive Output Modes

S-Video and Component video output are available only if your TV supports S-Video input or Component video input, respectively. If S-Video or Component video output does not work, check the TV connections and the TV input selection settings.

Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker- free, clear image than interlaced video.

This is only available with TVs that support progressive scan.

Progressive Scan Output (576p)

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture, in case of 576 progressive scan picture problems, It is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 576p HDD & DVD RECORDER, please contact our customer service centre.

Case 1 : Connecting to a Video (Composite) output jack

1.Connect a video(yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV amplifier).

• You will enjoy regular quality images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier).

(See pages 22)

yellow

Video/Audio

 

Cable

yellow

 

20 - English

Page 20
Image 20
Samsung DVD-HR725 Case 1 Connecting to a Video Composite output jack, Video, Component video and Progressive Output Modes